Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 16 fuel tps and iap maps?


Member

Status: Offline
Posts: 7
Date:
16 fuel tps and iap maps?


just started trying to sort out the 06-07 gsxr 600 maps and i have stumbled across 16 timing and 16 fuel maps, from what i have seen in the hayabusa and gsxr1000 they have 8 maps cyl1-4ms0 and cyl1-4ms1 is there a second set of maps for the secondary injectors??? from what i can tell it looks like cyl1-4ms0 cyl1-4ms0(secondary) cyl1-4ms1 cyl1-4ms1(secondary). i am working with just an ecu here an dont have a bike to activly test on.... can anyone confirm this?hmm

__________________


Member

Status: Offline
Posts: 9
Date:

I too am starting to take apart the bin from my K6 600.

Can you share what you are using to pull your .bin apart and find the maps?



__________________


Member

Status: Offline
Posts: 7
Date:

yes i used ida pro but now i have another issue... when i try to flash the ecu and reinstaall it in the bike it is not reponsive!!! every time it shows a successful flash however

__________________


Member

Status: Offline
Posts: 7
Date:

everything looked fine and flashed just like the 05 06 gsxr1000 or at least i thought it did, but now the bike wont start an the fuel pump wont even turn on..... crap it looks like its off to pick up another ecu again...

__________________


Member

Status: Offline
Posts: 9
Date:

try pulling the main fuse on the bike and reinstall it.

are the gauges jumping when you first switch the key on?

I doubt the ecu is trashed, just seems like it is stuck in the flash mode and not returning to normal.

I used IDA to pull apart the bin and I can see where there are maps, but when I try and make a definition Im having issues.

I think Im going to try and use Tunerpro to mod the bin. What did you use to change the bin/write your defintions for?

__________________


Member

Status: Offline
Posts: 9
Date:

and from what I've read, your orignal assumption in your first post is correct. 16 total fuel and ign maps. 8 for each mode, 2 for each cylinder.

__________________


Member

Status: Offline
Posts: 7
Date:

i can send you my preliminary xml for romraider, maps, and limiters whats your email.... i dont think the ecu is shot ethier the gauges sweep when you turn it on but the fuelpump doesnt prime and it doesnt get spark. i think i may have had a bad original binary dump... because one of my aud lines wasnt necisarily connected perfectly (the solder pad pulled up) can you send me your .bin to confirm? otherwise i will buy another ecu this afternoon and try another .bin dump...

__________________


Member

Status: Offline
Posts: 9
Date:

that would be awesome.

My email is dgoiti1@lsu.edu

I'll send you my bin as soon as Im 100% its correct. What happened is my friend used his software designed to dump K series honda ecus to dump this gsxr. The program wants 1000k of info so we initially dumped it, and had a bunch of filler. So we made changes and dumped it again for 256k not realizing the chip holds 384k. Either way, I will have a good bin by the end of today.

__________________


Member

Status: Offline
Posts: 9
Date:

I have a beautiful 384.0k .bin.

So once you email me I'll shoot it over to you.

__________________


Member

Status: Offline
Posts: 7
Date:

bike works!!! homework board jarbled the first line of my binary download fix it and she purrs like a kitten.... still need to confirm the preliminary .xml chrisgardell@gmail.com

__________________


Member

Status: Offline
Posts: 9
Date:

Im happy it all worked out.

I ran my .bin through Analyze and the major maps are awesome looking. I cant wait to get to tuning this thing.

where you able to send that .xml?



__________________


Member

Status: Offline
Posts: 7
Date:

still working on correcting  the maps. now that i can finally flash the damn thing i found out a few of my addresses and expressions werent right

__________________


Member

Status: Offline
Posts: 9
Date:

any progress?

Im about to sit and start on my definitons this sunday, I'd really appreciate it if you can give me a headstart.

Thanks.

__________________


Veteran Member

Status: Offline
Posts: 58
Date:

I can jump in and help you guys as well. Chrisg39, if you can send me a copy of your defs I can work on as well. I already have the bin I extracted from my 07 ecu. You can send it to redteg03@gmail.com . Thanks

__________________


Senior Member

Status: Offline
Posts: 147
Date:

How do you read the contents of the ECU? Do you use the AUD port? Or do you have a program that reads the contents from the main connector? I have a couple of Gsxr 750 and 600 ECUs that i want to disassemble and identify the maps!

Cheers

__________________

For your DIY or Professional tuning needs be sure to check out
PVTech ECU Research & Development



Veteran Member

Status: Offline
Posts: 58
Date:

I used a basic stamp to capture the code from the aud port.

__________________


Veteran Member

Status: Offline
Posts: 58
Date:

chrisq39 have you been working on this project still?

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard