Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: bin files for busa genII ?


Veteran Member

Status: Offline
Posts: 26
Date:
bin files for busa genII ?


hi 2 every body,

 

i remember there is a library of bin file??

 

i need a bin file for 32920-15H10  and is it possible to flash it to the 15h00?disbelief

 

please send the link.

 

cheer evileye

ad74710



__________________


Guru

Status: Offline
Posts: 546
Date:

if your advanced settings have the ecu type as US it will default to a 15h10 bin

__________________


Senior Member

Status: Offline
Posts: 186
Date:

Both EU and US hayabusa bin files are in the standard ecueditor installation, just type New/Stock Hayabusa -> K8, then select EU/US

in the advanced settings. 15H00 might not work on 15H10 because of the immobilizer support.

 



__________________


Senior Member

Status: Offline
Posts: 350
Date:

Always wondered that too, seen that on many bikes. Even a couple when connector is not on schematic but in harness.

This one is all grounded wires yes? Also found similar +12V connectors in harnesses, but they usually are all wires jointed.
But on the GND one some are always left unplugged and often only 2 of them jointed?

Anybody knows? Is it for some factory testing equipment? Measure points for some component?
Or is it just how they do the joints, in the connectors instead of crimping all wires together?

Edit: Do any GND wires lead to map switch? Used or unused?



-- Edited by Twice on Thursday 8th of November 2012 03:59:45 PM

__________________


Veteran Member

Status: Offline
Posts: 26
Date:

Maj750 & ballad2, thank you.

 

any one have idea what does the highlited symbol mean?



Attachments
__________________


Veteran Member

Status: Offline
Posts: 29
Date:

Kawi has those types of junctions in their harnesses as well, they use it to connect multiple grounds in a connector.

__________________


Senior Member

Status: Offline
Posts: 350
Date:

For the +12V i can buy that, or injectors/coils test point/joint since all are connected.

But in GND connector only 2 of 4 are jointed, rest just ends. And the fifth cable is all alone in a 1-pin connector also unconnected??

__________________


Veteran Member

Status: Offline
Posts: 26
Date:

I really don't know if it is test point or common ground?!!


__________________


Veteran Member

Status: Offline
Posts: 38
Date:

The symbol shown in the diagram is the plug for the alarm system optional.
The optional anti-theft does is open and close the contacts are bridged in the stock version.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse
Powered by ActiveBoard